Reliability Simplified Reliability Simplified
03
Industries / Oil and gas
03 Industry 03 of 06

Oil and gas

Reliability support for independent producers, midstream operators and gas plants: criticality, bad actors, PM strategy, critical spares, mechanical integrity support and commissioning, for facilities run without a corporate reliability group.

Fixed-price assessment · Monthly program
Who we help

Production, midstream and gas processing, without the corporate overhead.

The majors and the large midstream companies have reliability departments. The independent producer with a few tank batteries and a gas plant, the gathering system operator, the terminal, the compression fleet: they have a maintenance lead, a measurement tech and a contractor list. This page is for them.

The equipment that stops you: reciprocating and centrifugal compressors and their drivers, injection and transfer pumps, separators, heater treaters and dehydration units, amine and cryogenic gas plants, pig launchers and receivers, tank batteries and LACT units, loading racks and the pipeline itself. Most of it sits a long drive from the nearest technician.

We rank it, find the repeat failures, set PMs that fit a route-based crew, size the spares for the lead times you actually face, and put the records in your CMMS so the next audit and the next operator can find them. Where fixed equipment falls under API 510, 570 and 653 we support the program and the inspections stay with your certified inspectors. New facilities and expansions get commissioning and startup from people who have done it from the North Slope to Azerbaijan.

What we do

Criticality, bad actors, PMs, spares, integrity, startup.

Every item is done hands-on with your team and scoped to your plant. Nothing here is a software license.

  • ✓ Asset register and CMMS data build
  • ✓ Criticality ranking, RS 7-factor model
  • ✓ Bad actor analysis from your work order history
  • ✓ PM strategy for route-based crews
  • ✓ Critical spares for long lead times
  • ✓ Compressor and pump reliability
  • ✓ Mechanical integrity program support
  • ✓ Commissioning and startup of new facilities
How the work is priced

Two ways to start.

Step one

Site assessment

Fixed price · $5,600 · travel included

We come to the plant, walk it, review your CMMS and failure history, and talk to the people doing the work. You get a scored report on where your program sits, the gaps that matter, and what to fix first.

Book the assessment →
Monthly plan

Reliability Support Plan

One flat monthly rate for a block of reliability hours, sized like a part-time engineer. The hours go where the need is that month: a criticality ranking, a bad actor review, a PM rewrite, a spares call, a problem on the floor. Run out, and you add hours at your tier rate or step up a tier for a lower rate. Month to month, or 3, 6 and 12 month terms. Ask us about it today.

Ask us about the plan
Questions we get

Straight answers.

We are a small independent. Is this sized for us?

Yes. That is who it is for. The methods are the ones the majors use; the scope is one facility or one gathering system at a time, and the monthly program is a block of hours sized to the crew you have.

Our sites are remote and the crew runs a route. How do PMs fit?

The PM program is built around the route. Tasks are grouped by site and by the trip the crew already makes, with the condition checks that matter most for the equipment there, so the program adds stops to a route, not a second crew.

Compressors are our biggest downtime. Where do you start?

With the failure history by unit: valves, packing, lube and cooling, drivers and controls, and the operating envelope each unit actually runs in. Most compressor programs fail on the envelope and the spares position, not the overhaul interval.

Can you support our PSM and mechanical integrity program?

On the program side, yes: criticality driving the inspection priorities, the equipment register and data, the PM and inspection task basis, the link from inspection findings to the maintenance plan, and MOC discipline. The inspections themselves stay with your certified inspectors.

We are building a gas plant or a gathering system. Can you commission it?

Yes. Commissioning and startup is run as an eight-phase sequence, mechanical completion to spares and data handover, led by people who have commissioned production, pipeline, terminal and gas plant facilities. See the Commissioning page.

What does it cost?

The site assessment is $5,600, fixed price, travel included. The monthly program is one flat rate for a block of hours that goes wherever the need is that month. Run out, add hours at your tier rate or step up a tier for a lower rate. Month to month, or 3, 6 and 12 month terms. Stand-alone jobs and commissioning roles are scoped and quoted before we start.

Next step

Start with an assessment.

Tell us about your plant and what is failing. We will tell you where to start, and the assessment is one fixed price, travel included.